The parts for the Hydra AMS für Bambu Lab can be printed completely without supports and apart from 4 pieces M3x20 mm screws no additional parts are required for assembly. The individual parts are snapped together with dovetail joints and inserted into the standard AMS outer housing. All original built-in parts, such as the four feed motors, the rear motor, the front and rear rollers, the RFID circuit boards and the main circuit board as well as the PTFE hoses and cable connections can be reused.
Print files and conversion instructions: Printables STL
Content of the bundle:
1kg ABSx Astro Grey Filament 1.75mm
4 pieces - allen screws M3 x 20mm
1 piece - allen key 1.5 mm
1 piece - allen key 2.0 mm
1 piece - allen key 2.5 mm
1 pack (75g) Original Sportgummi (sugared fruit gum Made in Austria)
Nobufil ABS filament is made from recycled plastics. This is production waste that occurs during industrial processing. Thanks to special modifications, this material tends to have significantly less warping than filaments made from conventional ABS and has reduced odor formation. This means that processing on printers with an open installation space is also possible.
Print Settings
- Print temperature: 260°C ± 10
- Bed temp: 100°C ± 10
- Printing surface: textured PEI sheet
- Fan speed: max 15%
Hydra AMS for Bambu Lab - DIY Bundle
This bundle includes everything you need to convert the original AMS unit of a Bambu Lab 3D printer (Bambu Lab X1, Bambu Lab P1P) to the Hydra AMS introduced by humebeam. Hydra AMS is an improved drop-in main body replacement for the Bambu Lab AMS with the following changes:
- Larger spool widths of up to 75mm, meaning the most common 1kg spools from most filament manufacturers can now be used.
- Adjustable spool reels in four positions for 120mm to 205mm diameter spools.
- AMS feed/motor mechanism angled back five degrees to allow full spool printing.
Read in detail how to print and assamble your AMS for Nabmbu Lab 3D printer here.
